Illustrative values: in this showcase the numbers are not a real company's data but examples calculated with the stated assumption. Calculation assumption: about 1,600 MWh of annual production per 1 MWp installed and 2,400 kWh of annual consumption per household.
What we take on in a project
Site survey and feasibility
Irradiance, shading and ground data are measured on site. The report is delivered together with its assumptions.
Design and permits
Single-line diagram, structural calculation and the grid connection application run in one file.
Installation and commissioning
Mounting structure, modules, inverters and cabling are installed by our own crews. Commissioning tests are documented.
Monitoring and maintenance
Production is monitored at plant, inverter and string level. When a deviation appears, a site visit is scheduled.
Who it is for
Factory and warehouse roofs
Rooftop plant for self-consumption. Production overlaps daytime use; the surplus goes to the grid.
Land investment
Plant construction on open land. Survey, permits and grid connection run in one file.
Farms and greenhouses
Power sized to the site for irrigation pumps and greenhouse climate control. The plan follows the season.
What it means on site
One point of contact
Same team, same project file from survey to maintenance.
Documented commissioning
Every string is tested; results go into the handover file.
Our own mounting structure
Calculated for ground and wind load, assembled on site.
Open monitoring
Production data stays in your account and can be exported whenever you like.
Grid connection
Transformer, switchgear and metering point are built in the same project; we handle the connection application.
Maintenance and cleaning
Cleaning and inspection visits are planned from production data; the outcome is written to the file.
Why us
A plant earns its value not with the signed contract but with every kilowatt-hour it produces over the years. That is why we do not hand over and walk away: from survey to maintenance the same team, the same file, the same responsibility.
One point of contact
The team that writes the feasibility study also builds and monitors the plant. Every handover in between is a source of error; we remove the handover.
Numbers stated with their assumption
Production estimate, payback period and yield are delivered together with the assumption they were calculated on.
Designed for the last year
Structure, cabling and the maintenance plan are built for the plant's final year, not its first.
Calculate for your own site
Enter your roof or land area; installed capacity, annual production and the household equivalent are calculated with the assumption on this page.
m²
50050,000
769kWpInstalled capacity
1,231MWh / yearAnnual production
513householdsAnnual consumption equivalent
Calculation assumption: about 6.5 m² of area per 1 kWp, about 1,600 MWh of annual production per 1 MWp installed and 2,400 kWh of annual consumption per household. Results are illustrative; final values are set by the site survey and the equipment selected.
How a project moves
Survey
The land and the grid connection point are inspected on site.
Feasibility
Production estimate, cost and assumptions are gathered in one report.
Installation
Structure, module and inverter assembly is done by our own crew.
Commissioning
Tests are completed and production goes into monitoring.
Our projects
Illustrative distribution: in this showcase the marked provinces are not real projects; they show how the map works.
Hover a province or pick from the list.
Two ways to start
Request feasibility
We run every step from site survey to grid connection. You make the decision; we start the production.
Site survey report and shading analysis
Production estimate together with the assumptions it was calculated on
This page is a showcase example produced with Ranova Creative OS. The plant service described is illustrative.
Production estimates depend on the site survey and the equipment selected. Every feasibility study is delivered with its own assumptions.
Images are AI generated and do not show a real facility.
Provinces on the project map are illustrative; for a real client this section is filled from the company's sourced project list.
Values in the numbers section are illustrative and calculated with the assumption stated on the page; for a real client they come from the company's sourced production data.
